Tell Us About Your Project
Have questions? Our fountain specialists are ready to help. Fill out the form below or call 941-256-0152.
Have an account? Log in to check out faster.
DIMENSIONS: 22.5” W x 17” D x 13.375” H (small cabinet)
SKU: RA1
Please make the required selections above to add this item to your cart.
DIMENSIONS: 22.5” W x 17” D x 13.375” H (small cabinet)
Kasco RobustAire Small Cabinet System
Serves 1 – 3 dual-loop diffuser assemblies from a single compressor.
Models
RA1 — KM-60C (1/4 HP), 1 diffuser, 120V single phase, 2.5 running amps
RA2 — KM-60C (1/4 HP), 2 diffusers, 120V single phase, 2.5 running amps
RA3 — KM-120C (1/2 HP), 3 diffusers, 120V single phase, 3.5 running amps
RA2DP — KM-120C (1/2 HP), 2 diffusers, double piston, 120V single phase, 3.5 running amps
RAH1 / RAH2 — KM-60HC, 208–240V single phase, 1.25 running amps
RAH3 / RAH2DP — KM-120HC, 208–240V single phase, 1.75 running amps
Cabinet
Powder-coated 5052 aluminum, 22.5” x 17” x 13.375”
Holds one 1/4 or 1/2 HP compressor
Ground pad installation recommended; optional mounting bracket raises overall height to 23.625”
Cooling air filtered as it is drawn into the cabinet
One power cord with a plug
Compressor
KM-60C — 1/4 HP oilless piston, 3.4 CFM @ 5 psi, 2.7 CFM @ 25 psi, supplies up to 2 diffusers
KM-120C — 1/2 HP oilless piston, 4.9 CFM @ 5 psi, 4.0 CFM @ 25 psi, supplies up to 3 diffusers
Continuous-duty rated, ramped reed valve, 25 psi pressure relief valve, UL/CSA Recognized
Diffuser assembly
23” x 15.5” assembled, stainless steel base designed to land upright every time
Diffuser hose sits 6” above the bottom of the base
Check valve, integrated strain relief and rope tie-offs, molded edge guards
Tubing
SureSink tubing included; cabinet fitted with 3/8” barbs, 5/8” barb kit available
100’ rolls or 500’ reels; 100’ packages include all fittings
Warranty
Diffusers lifetime · Cabinet lifetime · SureSink tubing 15 years · Exhaust fans 3 years · Compressor motor 3 years · Piston cups and cylinders 2 years
The Kasco RobustAire Small Cabinet System is a bottom-diffused aeration system for small to mid-size ponds and lakes. A single rocking-piston compressor sits on shore in a powder-coated aluminum cabinet and feeds one to three dual-loop diffuser assemblies resting on the pond floor, lifting water from the bottom up so the whole column is mixed and oxygenated.
Diffused aeration reaches water a fountain cannot. The deepest water holds the least oxygen and the most muck, and it is where weed overgrowth, algae, odours and fish kills begin. A RobustAire system works on that layer directly, around the clock, and it keeps working in weather that would make a surface display impractical.
Small Cabinet systems ship complete with the compressor, cabinet, diffuser assemblies and SureSink weighted tubing. The cabinet is ground-mount as standard and can be fixed to a vertical structure with the optional mounting bracket. A remote manifold is available for sites where the water sits a long way from power.
Aerates from the bottom up — reaches the deep water a fountain cannot
Runs 1 – 3 dual-loop diffuser assemblies from one compressor
Patent-pending noise-cancelling cabinet dramatically reduces compressor sound
Built for 24-hour operation with minimal maintenance
SureSink weighted tubing included — it sinks and stays put, no anchoring needed
Lifetime warranty on the diffusers and the cabinet
Ground mount or vertical mount with the optional mounting bracket
Ideal for small to mid-size ponds and lakes
At Water Feature Pros, we carry the full line of Kasco Marine fountains and aerators. Diffused aeration and fountain aeration solve different problems: a fountain moves and displays the surface, while a RobustAire system lifts water from the very bottom, where oxygen is lowest and where muck, odours and fish kills begin. The right number of diffusers depends on the shape, depth and acreage of your water, not just its size — call us and we will size it with you.
Manufacturer: Kasco Marine
Series: RobustAire Small Cabinet System
Models: RA1, RA2, RA3 and RA2DP, plus the 208–240V RAH equivalents
Diffusers: 1 to 3 dual-loop assemblies
Compressor: One Teich-Aire KM-60C (1/4 HP) or KM-120C (1/2 HP)
Voltage: 120V single phase, or 208–240V single phase on RAH models
Cabinet: Powder-coated aluminum, 22.5” x 17” x 13.375”
Applications: Ponds, lakes, golf courses, resorts, commercial landscapes
SPECIFICATIONS SHEET
NO-CABINET SPECIFICATIONS SHEET
DIFFUSER ASSEMBLY MANUAL
MOUNTING BRACKET INSTRUCTIONS
ROBUSTAIRE BROCHURE
PLEASE READ CAREFULLY AND CONFIRM RECEIPT
REMEMBER WHEN RECEIVING A PRODUCT, YOU HAVE 72 HOURS TO MAKE A CLAIM
AFTER THAT, SHIPPING INSURANCE AND CLAIMS ARE VOID!
1) Products that are made-to-order are subject to the manufacturer’s scheduling and their production capability.
Production timelines that are disclosed are ‘estimates’ and may be subject to delays which are beyond the control of Water Feature Pros.
You will be advised of any production delays that may affect your expected delivery date.
Production timelines do not include the transit time required for shipping.
CANCELLATIONS:
1) Orders for product made-to-order may not be cancelled for any reason once submitted, accepted, and confirmed by the manufacturer, holding a place in their manufacturing ‘que.
2) Unforeseen production or shipping delays are not a basis for cancellation.
RETURNS:
1) Product that is made-to-order may not be returned except for the following conditions:
2) Stock items may be returned under the following conditions:
3) Return shipping expense shall be the responsibility of the customer. A restocking fee of 15% shall be deducted from the invoice value of the item excluding any applicable shipping and handling fees paid at the time of sale.
WARRANTIES:
1) The manufacturer’s written warranty for all products shall prevail.
2) Water Feature Pros offers no expressed nor implied warranty beyond that offered by the manufacturer. (Other than our 100% support in making MFG’s accountable for errors made on their part- We always champion our customer’s cause and try to get make them satisfied in the uncommon circumstance they are not)
SHIPPING & RECEIVING:
Small parcels weighing less than 50 lbs. that can be packaged within specified carton dimension limits will be shipped by ground parcel carrier or the US Postal Service.
All other items will be shipped using ground freight carriers.
All shipments by ground freight carriers will be delivered curbside to your property. You must be prepared with manpower or equipment to move the product from the curbside of your property to where you are going to keep it until it is installed. Note: the freight driver is not required (by their union contract) to move the product other than getting it off the truck when you ordered a liftgate (see section 2a). This being said, there are certainly instances if a customer is friendly to a driver (smiles, pleasant, bottle of water) that they may do a little more than just a curbside delivery. If your surroundings are conducive to them moving your pallets a little further onto your driveway using their pallet jack, they may do this, but again they are not required to do so as third party, labor union, contracted employees.
2) Standard ground freight rates include delivery by appointment and are typically done by a semi pulling a 40-52’ trailer. IF YOUR ADDRESS WILL NOT ACCOMMODATE THIS TYPE OF TRUCK YOU NEED TO LET US KNOW AND WE WILL REQUEST FREIGHT BE PUT ON A SMALLER TRUCK, WHICH MAY CARRY AN ADDITIONAL FEE FOR LIMITED ACCESS.
RECEIVING YOUR SHIPMENT:
The Consignee (you the customer) or a responsible designee must receive, inspect, and sign for products shipped by ground freight.
2) It will be your responsibility at the time of delivery to perform the following:
BE SURE TO SIGN PAPERWORK AS “PENDING INTERIOR INSPECTION”. YOU NEED TO THEN HAVE THE CONTENTS INSPECTED IN THE NEXT 72 HRS AND ANY DAMAGE REPORTED. TRUCKING COMPANIES WILL NOT EXTEND THEIR LIABILITY FOR YOUR PRODUCTS ONCE THEY ARE OUT OF THEIR POSSESSION AND IN YOURS BEYOND THIS TIME FRAME.
PHYSICAL INSPECTION OF WATER FEATURE PRODUCTS:
THESE ARE THE REQUIRED PHYSICAL INSPECTIONS OF ALL WATER FEATURE PROS PRODUCT DELIVERIES.
#1 YOU MUST HAVE THE DRIVER CO-SIGN THE DELIVERY RECEIPT BEFORE LEAVING.
#2 TAKE PHOTOGRAPHS (CELLPHONES ARE FINE) OF THE UNOPENED PALLETS OR CARTONS AS THEY ARE UNLOADED OFF THE DELIVERY TRUCK. THE MANUFACTURERS WILL TYPICALLY SHIP YOUR PRODUCT IN PACKAGING IN CONTAINERS ON PALLETS OR SHRINK WRAPPED AS A BUNDLE ON A PALLET.
#3 AFTER INSPECTING THE OUTSIDE THEN ALL CARTONS SHOULD BE OPENED AND THE PACKING REMOVED AROUND THE PRODUCTS INSIDE TO ALLOW A BRIEF PHYSICAL INSPECTION OF THE GOODS TO CONFIRM NO DAMAGE HAS BEEN DONE IN TRANSIT.
#4 IF YOU ARE UNABLE TO OPEN AND INSPECT THE SHIPMENT, OR, IF THE DRIVER IS UNWILLING TO WAIT, PLEASE WRITE “PENDING INSPECTION FOR POSSIBLE DAMAGE” ON THE DELIVERY RECEIPT (BOL). EVEN IF THE DRIVER SAYS NOT TO, PLEASE STILL WRITE THIS AS IT IS NECESSARY DOCUMENTATION TO FILE A CLAIM.
TAKE PICTURES OF ANY OR ALL OF THE BELOW ITEMS:
#5 ALL DAMAGE TO CARTONS AND/OR GOODS MUST BE NOTED ON THE DELIVERY RECEIPT. IF YOU DO NOT NOTE IT, A CLEAN DELIVERY RECEIPT WITH NO NOTES OF DAMAGE (REAL OR SUSPECTED) VOIDS ANY CLAIM YOU MAY HAVE AGAINST THE FREIGHT CARRIER, OR THE MANUFACTURER.
#6 IF EXTENSIVE DAMAGE IS IDENTIFIED AT DELIVERY, REMEMBER TO:
#7 REMEMBER THE FOLLOWING:
Questions before you order? Call the Pros at Water Feature Pros on 941-256-0152, or text 502-298-7752.
Have questions? Our fountain specialists are ready to help. Fill out the form below or call 941-256-0152.