Kasco J Series Fountains › Premium Nozzle upgrades
J Series Premium Nozzles
Premium Nozzles are Kasco's optional pattern upgrades for the J Series. They twist on in exactly the same way as the five nozzles that come with the fountain, but they are cut to a larger format and throw a noticeably bigger display with cleaner, more separated streams of water. You are not replacing the fountain, or anything inside it — you are changing the shape of the water.
- Sold separately
- Fits every J Series size
- Twist-and-lock, same as stock
- Up to six patterns
What they cost
Priced per nozzle. You can order as many patterns as you like and swap between them, and they are added while you configure a fountain on its product page — there is nothing to buy on this page.
| Fountain size | Patterns available | Price each |
|---|---|---|
| 3/4 HP and 1 HP | Mighty Oak, Magnolia, Mahogany, Madrone | $75 |
| 2, 3, 5 and 7.5 HP | Mighty Oak, Magnolia, Mahogany, Madrone | $325 |
| 2, 3, 5 and 7.5 HP | Palm, Fern | $325 |
Prices are current at the time of writing and exclude freight. The larger nozzles cost appreciably more than the small ones because they are a different, much bigger part — not a different finish.
The patterns
Four patterns are made in both sizes. Palm and Fern are only made for 2 HP and larger fountains. Part numbers differ between the two size groups, so quote the one that matches your horsepower.
Mighty Oak
A broad, full canopy — the widest-shouldered of the four that fit every size.
3/4 & 1 HP 431335K
2 HP and up 841335K
Magnolia
Lower and wider still, throwing well past its own height.
3/4 & 1 HP 431325K
2 HP and up 841325K
Mahogany
A tighter, taller canopy than Mighty Oak at the same horsepower.
3/4 & 1 HP 431345K
2 HP and up 841345K
Madrone
Close to Mahogany in height, a touch wider at the top.
3/4 & 1 HP 431330K
2 HP and up 841330K
Palm
A narrow, upright spray — the most restrained of the six, and the only one with a tighter footprint than the stock patterns at the same horsepower.
3/4 & 1 HP not available
2 HP and up 841320K
Fern
A flat, two-dimensional fan rather than a cone. Built for long, narrow ponds and channels where a round display would run out of water.
3/4 & 1 HP not available
2 HP and up 841315K
Spray dimensions
Kasco's published figures, in feet, given as height × width. On 2 HP and larger units the single-phase and three-phase motors throw slightly different patterns, so both are listed. 7.5 HP is three-phase only, which is why it appears in one table and not the other. Figures are nominal — wind, water level and mooring all move the real display around.
| Pattern | Part no. | 3/4 HP | 1 HP |
|---|---|---|---|
| Mighty Oak | 431335K | 10 x 24 | 13 x 34 |
| Magnolia | 431325K | 9 x 29 | 11.5 x 37 |
| Mahogany | 431345K | 11.5 x 28 | 14 x 34 |
| Madrone | 431330K | 11.5 x 28 | 14 x 35 |
| Palm | — | — | — |
| Fern | — | — | — |
| Pattern | Part no. | 2 HP | 3 HP | 5 HP |
|---|---|---|---|---|
| Mighty Oak | 841335K | 14.5 x 40 | 19.5 x 51 | 24.5 x 58 |
| Magnolia | 841325K | 14 x 35 | 18 x 60 | 23.5 x 72 |
| Mahogany | 841345K | 12 x 43 | 19 x 48 | 28 x 64 |
| Madrone | 841330K | 15 x 43 | 20 x 59 | 24 x 70 |
| Palm | 841320K | 12 x 26 | 16 x 36 | 20.5 x 40 |
| Fern | 841315K | 12 x 36 | 16 x 54 | 23 x 68 |
| Pattern | Part no. | 2 HP | 3 HP | 5 HP | 7.5 HP |
|---|---|---|---|---|---|
| Mighty Oak | 841335K | 14.5 x 40 | 19.5 x 51 | 24.5 x 58 | 27 x 60 |
| Magnolia | 841325K | 13.5 x 40 | 18 x 60 | 23.5 x 72 | 26 x 80 |
| Mahogany | 841345K | 14.5 x 35.5 | 20 x 47 | 25 x 55 | 29 x 72 |
| Madrone | 841330K | 15 x 43 | 20 x 51 | 25 x 57 | 26 x 75 |
| Palm | 841320K | 12 x 26 | 16 x 36 | 20.5 x 40 | 22 x 42 |
| Fern | 841315K | 12 x 36 | 19 x 53 | 23 x 59 | 24 x 66 |
Common questions
How are these different from the nozzles that come with the fountain?
Size and sharpness. Premium Nozzles are a larger part and produce a bigger display with cleaner, more clearly separated streams. The five included nozzles are not cut-down versions — they are simply a different, smaller-format set, and they are free with the fountain.
Do I have to buy one?
No. Every J Series fountain arrives with five working patterns. A Premium Nozzle is an upgrade you choose, and you can add one later to a fountain you have owned for years.
Which one should I pick?
Start with the shape of the water. Round, open ponds carry the wide canopies well — Mighty Oak, Magnolia, Madrone. Long, narrow ponds and channels suit Fern, which throws a flat fan instead of a cone, or Palm, which stays tight and upright. Then check the dimensions above against the distance from the fountain to your nearest bank, because a 72 ft wide display needs 72 ft of water. Ring us on 941-256-0152 and we will work through it with you.
Will a Premium Nozzle aerate the pond better?
No — and it is worth being plain about that. Premium Nozzles change how the fountain looks, not how much oxygen it puts into the water. The fountain keeps moving and circulating water as it always did. If aeration is the goal, the nozzle is the wrong lever; talk to us about the VFX series or a diffused aeration system instead.
Can I change back, or run more than one pattern?
Yes. Nozzles come off as easily as they go on, so you can keep the stock five and a Premium Nozzle or two and change the display whenever you want. Plenty of owners buy more than one pattern for exactly that reason. Shut the fountain down at the control panel before you swap anything.
Will it fit the fountain I already have?
If it is a J Series, yes — Premium Nozzles are made for every size from 3/4 HP to 7.5 HP. Order the part number that matches your horsepower group: the 43…K numbers fit 3/4 and 1 HP, the 84…K numbers fit 2 HP and larger. Tell us the model on the data plate and we will make sure you get the right one.
How a Premium Nozzle compares with the stock five
The five nozzles in the box are good patterns and most owners are happy with them. What you buy with a Premium Nozzle is scale and definition: a bigger display for the same pump, and streams that stay separate instead of breaking into spray. On a 3 HP fountain, for example, the stock Linden tops out at about 20.5 ft tall by 38 ft across, where a Premium Magnolia on the same unit runs 18 x 60 — a noticeably broader display from the same motor.
They also change what you can do with an awkward pond. Fern throws a flat fan rather than a cone, which suits a long, narrow stretch of water that a round pattern simply overshoots.
See the five patterns included with every J Series ›
Not sure which pattern suits your pond?
We have been selling and supporting fountains for 29 years. Tell us the pond size, the shape of the water and the display you have in mind, and we will tell you which nozzle gives you that look and what it costs on your fountain.

